China TPO dabeere Skin-enyi na enyi thermoplastic elastomer Si-TPV2150-70A Nrụpụta na Factory

TPO dabere na akpụkpọ thermoplastic elastomer Si-TPV2150-70A egosipụtara

TPO dabeere Skin-enyi na enyi thermoplastic elastomer Si-TPV2150-70A

SILIKE Si-TPV® 2150-70A Thermoplastic elastomer bụ ihe na-adịghị ike vulcanized thermoplastic silicone dabeere elastomer nke mere site a pụrụ iche na nkà na ụzụ dakọtara na-enyere silicone roba gbasasịrị na TPO ọbụna dị ka 2 ~ 3 micron ahụ n'okpuru microscope. Ihe ndị ahụ pụrụ iche na-ejikọta ike, ike na nguzogide abrasion nke ọ bụla thermoplastic elastomer nwere ihe ndị a na-achọsi ike nke silicone: nro, mmetụta silky, ọkụ UV na nguzogide kemịkalụ nke enwere ike ịmegharị ma jiri ya mee ihe na usoro mmepụta omenala.

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Ọrụ nlele

Vidiyo

Nkọwa

Si-TPV® 2150-70A nwere ike jikọta ya na PE, PP na ihe ndị ọzọ yiri ya, ọ bụ ngwaahịa emepụtara maka imetụ aka dị nro na ngwá electronic wearable, ngwa ngwa maka ngwaọrụ eletrọnịkị, ụgbọ ala, TPE dị elu, ụlọ ọrụ waya TPE. ......

Njirimara igwe eji eme ihe

Nwalee ihe	Ngwongwo	Nkeji	Nsonaazụ
ISO 37	Elongation na ezumike	%	650
ISO 37	Ike Tensile	Mpa	10.4
ISO 48-4	Shore A hardness	Shore A	73
ISO 1183	Njupụta	g/cm3	1.03
ISO 34-1	Ike akwa	kN/m	49
--	Nrụrụ mkpakọ (23 ℃)	%	25
--	MI (190 ℃, 10KG)	g/10 nkeji	68
--	Ọkụkụ kacha mma gbazee	℃	220
--	Akpụkpọ ọkụ kacha mma	℃	25

Njirimara

ndakọrịta SEBS, PP, PE, PS, PET, PC, PMMA, PA

Uru

1. Nye elu ya Pụrụ iche silky na akpụkpọ-enyi na enyi aka, nro aka mmetụta na ezi n'ibuNjirimara.

2. Enweghị plasticizer na mmanụ na-eme ka ọ dị nro, enweghị ihe egwu na-agba ọbara / nnyapade, enweghị isi.

3. UV kwụsiri ike na nguzogide kemịkalụ na njikọ dị mma na TPE na ihe ndị yiri pola.

4. Belata mgbasa ozi uzuzu, mgbochi mmanụ na obere mmetọ.

5. Ọ dị mfe ịmegharị, ma dị mfe ijikwa.

6. Nguzogide abrasion na-adịgide adịgide & nkwụchi nhịahụ & nguzogide ọkọ.

7. Mgbanwe dị mma na nkwụsị nke kink.

......

Otu esi eji

Ịkpụzi injection ozugbo.

• Ntuziaka nhazi ịkpụzi injection

Oge ihicha	2-4 elekere
Okpomọkụ ihicha	60-80 Celsius C
Okpomọkụ Mpaghara nri	180-190 Celsius C
Okpomọkụ Mpaghara etiti	190-200 Celsius C
Okpomọkụ mpaghara ihu	200-220 Celsius C
Okpomọkụ nozzle	210-230 Celsius C
Agbazekwa okpomọkụ	220°C
Okpomọkụ ebu	20-40 Celsius C
Ọsọ ịgba ọgwụ	Med

Ọnọdụ usoro ndị a nwere ike ịdị iche na ngwa na usoro nke onye ọ bụla.

• Nhazi nke abụọ

Dị ka ihe thermoplastic, Si-TPV® ihe nwere ike hazie nke abụọ maka ngwaahịa nkịtị.

• Nrụgide ịkpụzi injection

Nrụgide njide na-adabere na geometry, ọkpụrụkpụ na ebe ọnụ ụzọ ámá nke ngwaahịa ahụ. Ekwesịrị ịtọ nrụgide njide ka ọ bụrụ ọnụ ala dị ala na mbụ, wee jiri nwayọọ nwayọọ na-abawanye ruo mgbe ahụghị ntụpọ yiri ya na ngwaahịa a kpụrụ ntụtụ. N'ihi njirimara na-agbanwe nke ihe ahụ, oke njide nwere ike ime ka nrụrụ dị njọ nke akụkụ ọnụ ụzọ ámá nke ngwaahịa ahụ.

• Nrụgide azụ

A na-atụ aro na nrụgide azụ mgbe a na-emegharị ihe nkedo kwesịrị ịbụ 0.7-1.4Mpa, nke ga-eme ka ọ bụghị naanị na-agbaze agbaze, kamakwa hụ na ihe ahụ adịghị emebi emebi nke ukwuu. The akwadoro ịghasa ọsọ nke Si-TPV® bụ 100-150rpm iji hụ na zuru ezu agbaze na plasticization nke ihe na-enweghị ihe mebiri emebi ihe mere site shear kpo oku.

kwuo

Enwere ike ịmepụta ngwaahịa elastomer 1.Si-TPV site na iji usoro nrụpụta thermoplastic ọkọlọtọ, gụnyere imebiga ihe ókè ma ọ bụ na-akpụzi ya na ihe eji eme plastik dị ka PP, PE.

2.The kemgwucha silky mmetụta nke Si-TPV elastomer adịghị achọ ọzọ nhazi ma ọ bụ mkpuchi nzọụkwụ.

3. Usoro usoro nwere ike ịdị iche na ngwá ọrụ na usoro nke onye ọ bụla.

4. A na-atụ aro ihicha mmiri na-ekpochapụ desiccant maka ihicha niile.